In the forging production, according to the law of constant volume, it is possible to carry out technological calculations such as the size of the forging, the size of the process parts and the size of the mold.
Mechanical seals have become one of the most common forms of sealing in motorized equipment in oil refining and chemical installations. Moreover, with the continuous improvement of their design and manufacturing level and the continuous development of new materials, their application scope will be further expanded.
Traditionally, noise control engineers often used test methods to identify noise problems and repeated test methods to solve the problems. However, now many industries such as automobiles, aerospace, heavy equipment, industrial equipment, air conditioning, heating,…
IPX5 test method: 1. Nozzle inner diameter: 6.3 mm; 2. Water flow rate: 12.5 L / min; 3. Water pressure: according to the regulation of water flow; 4. the surface of the enclosure spray water…
The basic content required for motor selection is: the type of load driven, rated power, rated voltage, rated speed, and other conditions.
This feature of Solidworks wraps the sketch onto a flat or non-planar surface. You can create a plane from a cylindrical, conical, or extruded model. You can also select a plane profile to add multiple closed spline sketches. Wrap features support contour selection and sketch reuse.
According to the systematic design concept, a hydraulic high velocity cutting machine was designed to meet the production of fast and accurate cutting round bar stock or wire. Subsequently, the performance and efficiency of the cutting machine was analyzed. This design work would provide enlightenment and reference in the cutting machine design field.
The belt conveyor adds a telescopic mechanism to the ordinary belt conveyor, so that the belt conveyor can freely expand and contract in the length direction. Users can adjust the buttons according to their own requirements, and control the length of the telescopic belt conveyor at any time.
Summary of debugging problems of plane mask machine (worth a look)
In order to improve the plating efficiency, a negative voltage is generally applied to the workpiece.
The surface treatment technology of forging dies is not widely used in China, so it is necessary to develop in this field. Surface hardening support such as carburizing, nitriding, boronizing, carbonitriding of the whole mold cavity and local spraying, brush plating and surfacing of the mold cavity are very promising.
The equipment uses ultrasonic welding to fuse the elastic band to the outside of the mask body, which is a process after the external ear mask is produced.
All materials and components used on the machine shall be compatible with the usual cleaning products used on these production lines.
The principle is the use of sound waves reached the peak position of the gap between the plastic, in the case of pressure, so that the two fusible elements which could be part of the plastic parts in contact with each other to produce the high-speed friction melts, the contact surface of the plastic fusion, achieve the purpose of processing.
During the work of the mechanical designer, every small point must be considered very clearly. As a rigorous worker, you must understand those complicated mechanical knowledge points.
