2022.5.1 Update
12-September-2023
Add-Ins |
---|
Resolved an issue where it wasn’t possible to open the Autodesk App Manager. INVGEN-70464 |
Add-Ins – Content Center |
---|
Resolved an issue in Tube & Pipe where it was not possible to place certain fittings into the Runs assembly. INVGEN-65458 |
Resolved an issue with missing zeros in the Content Center family table after replacing commas with dots. INVGEN-70352 |
Resolved an issue in Content Center where the family table dialog won’t stay opened after clicking the Apply button. INVGEN-71174 |
Add-Ins – Tube and Pipe |
---|
Resolved in issue in German Inventor environment with changing decimal separator when authoring Tube & Pipe data. INVGEN-70703 |
AnyCAD – Revit |
---|
Resolved an issue where the linked Revit view is lost after using Rebuild All. INVGEN-68322 |
Assemblies – Rep Position |
---|
Improved stability of Positional Representations. INVGEN-65712 |
Drawings – Views |
---|
Resolved an issue where the model isn’t saved after updating a model in a drawing. INVGEN-64799 |
Model States |
---|
Improved performance when switching model states. INVGEN-67033 |
Model States – BoM – Partslist |
---|
Resolved an issue in iLogic where checking for property updates doesn’t work on sub assemblies. INVGEN-69652 |
Parts – 2D Sketch – Projection |
---|
Resolved an issue causing to flip the direction of the sketch arc after deleting the bottom of the line’s constrain of the projected loop. INVGEN-68308 |
Parts – Derive |
---|
Resolved issue where values of derived parameters were not updating as expected for some models. INVGEN-19799 |
Parts – Properties |
---|
Improved stability when changing the customized properties. INVGEN-71177 |
Parts – Sheet Metal |
---|
Resolved an issue with lost references in projected geometry when changing an iPart member. INVGEN-70239 |
Parts – iFeature-iPart |
---|
Resolved an issue where the Nominal Value and the Model Value are incorrect when changing the Evaluated Size for the iFeature Parameters. INVGEN-67827 |
Platform |
---|
Improved performance when opening assembly with the Unique File Names project setting. INVGEN-64882 |
Resolved an issue where the model state member document is currupted when using the Save command. INVGEN-69659 |
Improved stability when saving a multisolid part file after deleting a feature. INVGEN-71289 |
Translators |
---|
Resolved a file corruption issue by preventing drag and drop into a sub-assembly for associatively imported components. INVGEN-70161 |
UI |
---|
Resolved an issue where InvRO presented the option to save documents, and doing so could corrupt the file. The dialog no longer appears in InvRO and no documents are saved. INVGEN-65812 |